client portal

Fire Alarms

Fire Detection and Alarm Systems

It is a common fact that your fire protection strategy should be to prevent fire, in the event that fire breaks out early fire detection is essential. Every second counts and, early warning from an automatic fire detection system could make the difference of a businesses ability to recover from a fire without too much disruption or cost. Fire Detection systems provide the earliest possible warning of fire in specification areas covered by detection, in turn, this can facilitate safe and speedy evacuation of staff, and visitors from your premises. IPMSL design, supply, install and commission fire detection systems, we also offer service and maintenance agreements for any fire alarm system.


Conventional Manual Fire Alarms

Typically this level of fire alarm system will be designed to generate localised alarm activations using call points only. Upon an alarm activation the system will initiate sounders and beacons throughout the premises alerting staff and visitors of the needs to safely evacuate from the premises to a pre defined position. This would apply for instance to a small commercial or large residential premises. This type of system would meet the requirements of European Standards & BS 5839 Part 1, depending on the specific requirements of the site and its occupants, will determine the category of fire alarm system required.


Conventional Automatic Fire Alarms

Typically this level of fire alarm system will be designed to generate localised alarm activations using call points & automatic smoke/heat Detectors. Upon an alarm activation the system will initiate sounders and beacons throughout the premises alerting staff and visitors of the needs to safely evacuate from the premises to a pre defined position. This would apply for instance to small to medium commercial and, medium sized retail premises. This type of system would meet the requirements of European Standards & BS 5839 Part 1, depending on the specific requirements of the site and its occupants, will determine the category of fire alarm system required.


Addressable Automatic Fire Alarms

Typically this level of fire alarm system will be designed to generate localised and site wide alarm activations using call points & automatic smoke/heat Detectors, in addition this type of system facilitates interfacing with other building management systems. Upon an alarm activation the system will initiate sounders and beacons and, change the state of interfaces throughout the premises, alerting staff and visitors of the need to safely evacuate from the premises to a pre defined position. In addition this type of system would typically have a connection to our monitoring centre for contacting keyholders when activated, and if required alert the fire brigade automatically. This would apply for instance to a Medium to Large commercial, industrial buildings or large residential care home premises. This type of system would meet the requirements of European Standards & BS 5839 Part 1, depending on the specific requirements of the site and its occupants, will determine the category of fire alarm system required.

Currently IPMSL work with and integrate Fire Detection Systems employing the following systems and product types along with our Networked solutions.

© Integrated Protection Limited Maintenance Services

Powered by

extramile-communications